고체역학연구실

1. S. Sahu, M.Z Ansari, D.P. Mondal and C.D. Cho, 2019, “Quasi-static Compressive Behaviour of Aluminium Cenosphere Syntactic Foams,” Materials Science and Technology, vol.35(7), pp.856~864.  

2. Y.Q. Chen, C. Jiang and C.D. Cho, 2019, “Effects of Freeze–Thaw Thermal Cycles on the Mechanical Degradation of the Gas Diffusion Layer in Polymer Electrolyte Membrane Fuel Cells,” Polymers, vol.11(428), polym11030428(13pp).

3. Y.H. Hong, T.S. Jung and C.D. Cho, 2019, “Effect of Heat Treatment on Crack Propagation and Performance of Disk Brake with Cross Drilled Holes,” International Journal of Automotive Technology, vol.20(1), pp.177~185.

4. S.K. Lee, S.S. Lim, Y.C. Shin, H.J. Choi, T.B. Kim, J.B. Kim, D.K. Choi, C.D. Cho and T.K. Jung, 2019, “Brazing Characteristics and Bonding Strength of Pure Titanium Joints Brazed with Low-Melting Temperature Zi–17Ti–22Ni Filler Metal,” Journal of Nanoscience and Nanotechnology, vol.19(3), pp.1592~1596.     

5. C.D. Cho, Y.H. Hong, C. Jiang and Y.Q. Chen, 2019, "Study of Dynamic Behavior of Magnetostrictively Patterned Flexible Micro-Wings," IEEE Transactions on Magnetics, vol.55(2), 4001604(4pp).

6. Y.Q Chen, C Jiang and C.D. Cho, 2018, “ An Investigation of the Compressive Behavior of Polymer Electrode Membrane Fuel Cell’s Gas Diffusion Layers under Different Temperatures,” Polymers, vol.10(9), polym10090971(9pp).

7. J.W. Park, C.D. Cho, S.S. Cheon and J.U. Cho, 2018, “A Study on Fracture behaviors of aluminum and CFRP jointed with pin,” Journal of Mechanical Science and Technology, vol.32(8), pp. 3617~3623.

8. M.Z. Ansari, M. Bisen and C.D. Cho, 2018, “Modelling and Analysis of Diaphragm Integrated SU8/CB Nanocomposite Piezoresistive Polymer Microcantilever Biosensor,” Microsystem Technologies-micro-and nanosystems-information storage and Processing Systems, vol.24(7), pp.3061~3068.  

9. M.Z. Ansari, S. Kumar, S.K. Prajapati and C.D. Cho, 2018, “Modeling and Numerical Characterization of High Sensitive Microcantilever Biosensors with Parabolic Piezoresistor,” Nano, vol.13(5), 1850055(9pp).

10. T.S. Jung, Y.H. Hong, S.S. Park, C.M. Kim, Y.H. Hong and C.D. Cho, 2018, “Numerical Study for Brake Squeal by Machining Patterns on Frictional Surface,” International Journal of Automotive Technology, vol.19(2), pp.281~289.

11. J.Y. Kim, S.S. Park and C.D. Cho, 2018, “Development and Evaluation of Universal Stent Tester for Cardiovascular Stents,” Journal of the American College of cardiology, vol.71(16), p.S46.

12. H.J. Kang, T.S. Jung, Y.H. Hong, S.S. Park, C.M. Kim, Y.H. Hong and C.D. Cho, 2018, “Effect of Cross-drilled Hole Shape on Crack of Disk Brake Rotor,” Transactions of KSAE, vol.26(1), pp.67~76.

13. T.S. Jung, Y.S. Park, Y.J. Kim and C.D. Cho, 2017, “Integrated Approach to Optimal Automotive Timing Chain System Design,” International Journal of Automotive Technology, vol.18(6), pp.1037~1045.

14. R.Q. Wang, L. Zhang, D.Y. Hu and C.D. Cho, “Evaluation of Three Unit Cell Models in Predicting the Mechanical Behaviour of 3D Four-directional Braided Composites,” Journal of Composite Materials, vol.51(27), pp.3757~3767.

15. J.Y. Kim and C.D. Cho, 2017, “Development of a Reinforced Bend with Shear Control Ring for District Heating,” Energy Procedia, vol.116, pp.510~517.

16. R.Q. Wang, L. Zhang, D.Y. Hu, X. Liu, C.D. Cho and B. Li, 2017, “Progressive Damage Simulation in 3D Four-directional Braided Composites Considering the Jamming-action-induced Yarn deformation,” Composite Structures, vol.178, pp.330~340.

17. R.Q. Wang, L. Zhang, D.Y. Hu, X. Liu, C.D. Cho and B. Li, 2017, “Progressive Damage Simulation in 3D Four-directional Braided Composites Considering the Jamming-action-induced Yarn Deformation,” Composite Structures, vol.178, pp.330~340.

18. Y.H. Hong, T.S. Jung, C.M. Kim, Y.H. Hong and C.D. Cho, 2017 “An Experimental Study for Machined Patterns of Friction Surface on Two-pieces Disc Brake Rotor in Performance Aspect,” Transactions of KSAE, vol.25(5), pp.581~589.

19. S. Lu, M.J. Lian, M.J. Liu, C.D. Cho and C.H. Piao, 2017, “Adaptive Fuzzy Sliding Mode Control for Electric Power Steering System,” Journal of Mechanical Science and Technology, vol.31(6), pp.2643~2650.

20. H.J. Bang and C.D. Cho, 2017, “Failure Behavior / Characteristics of Fabric Reinforced Polymer Matrix Composite and Aluminum6061 on Dynamic Tensile Loading,” Journal of Mechanical Science and Technology, vol.31(8), pp.3661~3664.

21. C.Y. Park and C.D. Cho, 2017, “Effect of High Hardness Armor Plate Sequences on Ballistic Impact Response,” J. Korean Soc. Precis. Eng., vol.34(6), pp.417~424.

22. Y.S. Park, T.S. Jung, Y.H. Hong, Y.J. Kim, Y.K. Park, J.J. Lee and C.D. Cho, 2017, “Transmission Error Influences by Initial Tension of Timing Chain System,” Transactions of KSAE, vol.25(2), pp.133~139.

23. R.Q. Wang, L. Zhang, D.Y. Hu, C.H. Liu, X.L. Shen, C.D. Cho and B. Li, 2017, “A Novel Approach to Impose Periodic Boundary Condition on Braided Composite RVE Model Based on RPIM,” Composite Structures, vol.163, pp.77~88.

24. G.W. Hwang, J.U. Cho and C.D. Cho, 2016, “A Property of Crack Propagation at the Specimen of CFRP with Layer Angle,” Trans. Korean Soc. Mech. Eng. A, vol.40(12), pp.1013~1019.

25. J.H. Lee, J.U. Cho, G. Zhao and C. Cho, 2016, “An Investigation on the Fatigue Behavior of DCB Specimen Bonded with Aluminum Foam at Mode III,” Journal of Mechanical Science and Technology, vol.30(10), pp.4475~4478.

26. L. Mu, D.B. Xiao, C.D. Cho and G.P. Zhao, 2016, “Two-dimensional Dynamic Analysis of Sandwich Plates with Gradient Foam Cores,” Journal of Mechanical Science and Technology, vol.30(9), pp.4083~4093.

27. J.H. Lee, H.K. Choi, S.S. Kim, J.U. Cho, G. Zhao, C. Cho and D. Hui, 2016, “A Study on Fatigue Fracture at Double and Tapered Cantilever Beam Specimens Bonded with Aluminum Foams,” Composites Part B-Engineering, vol.103, pp.139~145.

28. T.S. Jung, B.W. Cha, Y.H. Hong, C.M. Kim, Y.H. Hong and C.D. Cho, 2016, “An Experimental Study for Machined Patterns of Friction Surface on Disc Brake Rotor in Performance Aspect,” Transactions of KSAE, vol.24(4), pp.471~479.

29. M.Z. Ansari, C.D. Cho, 2016, "An Optimised Silicon Piezoresistive Microcantilever Sensor for Surface Stress Studies," Microsystem Technologies-micro-and Nanosystems-Information Storage and Processing System, vol.22(9), pp.2279~2285.

30. J.M. Kim, J.Y. Kim and C.D. Cho, 2016 “Experimental Study for the Reinforcement of District Heating Pipe,” Trans. Korean Soc. Mech. Eng. A, vol.40(3), pp.245~252.

31. W. Zhang, J. Liu, C.D. Cho and X. Han, 2016, “A Fast Bayesian Approach Using Adaptive Densifying Approximation Technique Accelerated MCMC,” Inverse Problems in Science and Engineering, vol.24(2), pp.247~264.

32. W. Zhang, H. Ning, J. Liu and C.D. Cho, 2016, “Fast Bayesian Approach to Model Calibration of Vehicle Occupant Restraint Systems,” International Journal of Crashworthiness, vol.21(1), pp.1~8.

33. C.H. Piao, Z.C. Li, S. Lu, Z.K. Jin and C.D. Cho, 2016, “Analysis of Real-Time Estimation Method Based on Hidden Markov Models for Battery System States of Health,” Journal of Power Electronics, vol.16(1), pp.217~226.

34. M.Z. Ansari, C.D. Cho, 2016, “Effect of P-type and N-type Piezoresistors on Characteristics of High Sensitive Silicon Piezoresistive Microcantilever Designs,” Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, vol.22(1), pp.93~101.

35. W. Zhang, C.D. Cho, C.H. Park and H.J. Choi, 2016, “Sobol's Sensitivity Analysis for a Fuel Cell Stack Assembly Model with the Aid of Structure-selection Techniques,” Journal of Power Sources, vol.301, pp.1~10.

36. Y.H. Hong, K.S. Lee and C.D. Cho, 2015, “Shape-Dependent Resistances of Ni–Cr and Ta–N Thin Films for Sensor Applications,” International Journal of Future Engineering, vol.2015, pp.1~5.

37. L. Mu, B. He, D. Xiao, G. Zhao and C.D. Cho, 2015 “Dynamic Response of Beam-like Composite Sandwich Plates with Transversely Flexible Cores,” Ocean Engineering, vol.108, pp.778~788. 

38. H.J. Bang, Y.H. Ju, J.H. Choi, H.S. Shin, B.S. Jung, K.J. Park, S.K. Lee and C.D. Cho, 2015 “Development of Computational Model for Spot Welding and Effect Analysis on Welding Conditions,” Transactions of KSAE, vol.23(6), pp.642~649.

39. K.S. Lee, C.D. Cho, 2015, “Study of Noncontact Torque Measurement Method with Magnetic Sensor Band,” Journal of Mechanical Science and Technology, vol.29(9), pp.3897~3903.

40. L. Mu, C.D. Cho, G.P. Zhao, D.B. Xiao, 2015 “A New Indentation Model for Sandwich Circular Panels with Gradient Metallic Foam Cores,” Composites Part B-Engineering, vol.83, pp.270~275.

41. W. Zhang, J. Liu, C.D. Cho and X. Han, 2015, “A Hybrid Parameter Identification Method Based on Bayesian Approach and Interval Analysis for Uncertain Structures,” Mechanical Systems and Signal Processing, vol.60~61, pp.853~865.

42. H.S. Cho, J.U. Cho and C.D. Cho, 2015, “Experimental and Analytical Verification of the Characteristics of Shear Fatigue Failure in the Adhesive Interface of Porous Foam Materials,” Journal of Mechanical Science and Technology, vol.29(6), pp.2333~2339.

43. C.D. Cho, K.K. Poornesh and J.M. Kim, 2015, "Micromechanically Motivated Constitutive Model to Characterize the Hygrothermomechanical Response of Polymer Electrolyte Membrane," Journal of Mechanical Science and Technology, vol.29(3), pp.1145~1150.

44. W. Zhang, C.D. Cho, 2015, " A Method for Epistemic Uncertainty Quantification and Application to Uniaxial Tension Modeling of Polymers,” Journal of Mechanical Science and Technology, vol.29(3), pp.1199~1206.

45. K.K. Poornesh, C.D. Cho, 2015, “Stability of Polymer Electrolyte Membranes In Fuel Cells: Initial Attempts to Bridge Physical And Chemical Degradation Modes,” Fuel Cells, vol.15(1), pp.196~203.

46. T. Gao, A.J. Kinloch, B.R.K. Blackman, F.S. R. Sanchez, S.K. Lee, C.D. Cho, H.J. Bang, S.S. Cheon and J.U. Cho, 2015, "A Study of the Impact Properties of Adhesively-bonded Aluminum Alloy Based on Impact Velocity," Journal of Mechanical Science and Technology, vol.29(2), pp.493~499.

47. Z. H. Tan, L. S. Liu, Y. S. Sun and C.D. Cho, 2015, “Response of an Indented Square Tube Under Impact Loading,” Strength of Materials, vol.47(1), pp.156~163.

48. M.S. Han, H.K. Choi, J.U. Cho and C.D. Cho, 2015, "Fracture Property of Double Cantilever Beam of Aluminum Foam Bonded with Spray Adhesive," Journal of Mechanical Science and Technology, vol.29(1), pp.5~10.

49. K.S. Lee, C.D. Cho, 2015, " A Feasibility Study of a Noncontact Torque Sensor with Multiple Hall Sensors," Journal of Sensors, vol.2015, 126935(6pp).

50. H.J. Bang, S.K. Lee, C.D. Cho and J.U. Cho, 2015, "Study on Crack Propagation of Adhesively Bonded DCB for Aluminum Foam using Energy Release Rate," Journal of Mechanical Science and Technology, vol.29(1), pp.45~50.

51. N. Wang, C.D. Cho, 2015, “An Investigation of the Mechanical Behaviors of [45/-45/0/90]ns Satin Weave Composite at Different Loading Rates,” Mechanics of Advanced Materials and Structures, vol.22(5), pp.367~375.

52. W. Zhang, C.D. Cho and Y. Xiao, 2014, "An Effective Inverse Procedure for Identifying Viscoplastic Material Properties of Polymer Nafion," Computational Materials Science, vol.95, pp.159~165.

53. C.H. Piao, C. Jiang, H.T. Qiao, C.D. Cho, and S. Lu, 2014, "Modeling and Implementation of Fixed Switching Frequency Sliding Mode Control to Two-Stage DC-DC Converter," International Journal of Control Automation and Systems, vol.12(6), pp.1225~1233.

54. A. Belhocine, C.D. Cho, M. Nouby, Y.B. Yi and A.R.A. Bakar, 2014, " Thermal Analysis of Both Ventilated and Full Disc Brake Rotors with Frictional Heat Generation," Applied and Computational Mechanics, vol.8, pp.5~24.

55. S.Y. Kwak, H.Y. Hwang and C.D. Cho, 2014, "Thermal Stress Analysis Method Considering Geometric Effect of Risers In Sand Mold Casting Process," China Foundry, vol.11(6), pp.531~536.

56. T.S. Jung, C.D. Cho, 2014, "Computational Study of Automotive Drum Brake Squeal," Transactions of KSAE, vol.22(7), pp.16~22.

57. Y. Xiao, C.D. Cho, 2014, "Experimental Investigation and Discussion on the Mechanical Endurance Limit of Nafion Membrane Used in Proton Exchange Membrane Fuel Cell," Energies, vol.7(10), pp.6401~6411.

58. M.Z. Ansari, C.D. Cho, 2014, "On Accuracy of Sensitivity Relations for Piezoresistive Microcantilevers Used in Surface Stress Studies," International Journal of Precision Engineering and Manufacturing, vol.15(10), pp.2133~2140.

59. Z. Tan, W. Zhang, C. Cho and X. Han, 2014, "Failure Mechanisms of Concrete Slab-soil Double-layer Structure Subjected to Underground Explosion," Shock Waves, vol.24(5), pp.545~551.

60. K.K. Poornesh, L.Wendling, Y. Xiao and C.D. Cho, 2014, "Effect of Hygrothermal Ageing on the Tensile and Fracture Response of a Fuel Cell Membrane," Smart Materials and Structures, vol.23(7), 075017(4pp).

61. J.H. Lee, T.S. Jung, C.D. Cho and J.Y. Kim, 2014, "Development of Three-Way Proportional Control Valve and Performance Study," Korean Journal of Air-Conditioning and Refrigeration Engineering, vol.26(5), pp.218~223.

62. Y. Xiao, K.K. Poornesh, L. Wendling and C.D. Cho, 2014, " Ex-situ temperature and Humidity Aging Effect on the Tensile Behavior of Nafion N117 Membrane Used in Ionic Polymer–Metal Composite Actuators," Materials Letters, vol.124, pp.293~295.

63. H.J. Bang, S.K. Lee, C.D. Cho, J.U. Cho and H.K. Choi, 2014, "Fracture Behavior of Adhesive-Bonded Aluminum Foam with Double Cantilever Beam," Trans. Korean Soc. Mech. Eng. A, vol.38(5), pp.521~526.

64. Y. Xiao, C.D. Cho, 2014, "Effects of Temperature and Volume Agglomerate Fraction on Mechanical Response of PEMFC Electrodes," Applied Mechanics and Materials, vols.548-549, pp.379-382.

65. C.H. Piao, C. Jiang, H.T. Qiao, C.D. Cho and S. Lu, 2014, "Study on the Control Algorithm of Two-Stage DC-DC Converter for Electric Vehicles," Advances in Mechanical Engineering, vol.2014, 203793(18pp).

66. N. Wang, C.D. Cho, 2014, "Dynamic Compressive Behaviors of Multi Directional Woven Composite Laminates at Different Strain Rates," Polymers & Polymer Composites, vol.22(2), pp.169-175.

67. H.K. Kim, C.J. Jung and C.D. Cho, 2014, "Dynamic-Elastic Deformation Analysis for Precise Design of High Speed Press Machine," Trans. Korean Soc. Mech. Eng. A, vol.38(1), pp.79~88.

68. C.H. Park, M.L. Liu, L. Su, Z.C. Li, C.D. Cho and S. Lu, 2014, “Study on Stable Estimation Method for Lead-acid Battery SOC by Extended Kalman Filter,” International Journal of Control and Automation, vol.7(4), pp.429~438.

69. M.Z. Ansari, C.D. Cho, W.J. Choi, M.G. Lee, S.K. Lee and J.M. Kim, 2013, "Improving Sensitivity of Piezoresistive Microcantilever Biosensors Using Stress Concentration Region Designs," Journal of Physics D-Applied Physics, vol.46(50), 505501(7pp).

70. S.S. Kim, M.S. Han, J.U. Cho and C.D. Cho, 2013, "Study on the Fatigue Experiment of TDCB Aluminum Foam Specimen Bonded with Adhesive," International Journal of Precision Engineering and Manufacturing, vol.14(10), pp.1791-1795.

71. M.S. Han, H.K. Choi, J.U. Cho and C.D. Cho, 2013, "Experimental Study on the Fatigue Crack Propagation Behavior of DCB Specimen with Aluminum Foam," International Journal of Precision  Engineering and Manufacturing, vol.14(8), pp.1395-1399.

72. J.U. Cho, H.K. Choi, S.K. Lee, C.D. Cho and M.S. Han, 2013, “Experimental Study on the Impact Characteristics of a Sandwich Composite with an Aluminum Honeycomb Cores,” International Journal of Automotive Technology, vol.14(3), pp.415-421.

73. M.Z. Ansari, C.D. Cho, 2013, “High S/N Ratio Slotted Step Piezoresistive Microcantilever Designs for Biosensors, ” Sensors, vol.13(4), pp.4088-4101.

74. K.K. Poornesh, Y. Xiao and C. Cho, 2013, “Thermo-Mechanical Response of Fuel Cell Electrodes: Constitutive Model and Application in Studying the Structural Response of Polymer Electrolyte Fuel Cell,” Fuel Cells, vol.13(2), pp.217-226.

75. M. S. Han, S. O. Bang, J. U. Cho, S. Lee and C. Cho, 2013, “Experimental Study on the Impact Characteristics of a Sandwich Composite with an Aluminum Foam Core,” International Journal of Automotive Technology, vol.14(1), pp.61-66.

76. J.M. Kim, M.G. Lee, B.J. Kim and C.D. Cho, 2013, “A Prediction of the Relation between the Disc Brake Temperature and the Hot Judder Critical Speed,” Transactions of KSAE, vol.21(1), pp.61-67.

77. G.H. Kim, J.H. Lim, I.S. Park, Y.B. Chun and C.D. Cho, 2013, “A Study on Traffic Accident Reconstruction through Vehicle Crash Test,” Transactions of KSAE, vol.21(6), pp.58-63.

78. N. Wang, C.D. Cho, 2012, “Mechanical Properties and Failure Modes of Polymer Matrix Composite Laminates,” Society of Plastics Engineers, vol.2012, spepro.004505(2pp).

79. N. Wang, C.D. Cho, 2012, “Effect of Compressive Loading Speed and Stacking Sequence on Mechanical Characteristics of Satin Weave E-Glass/Epoxy Composites,” Polymer Composites, vol.33(9), pp.1603-1612.

80. K.W. Choi, S.H. Park, Y.M. Song, C.D. Cho and H.S. Lee, 2012, “Robustly Nano-tailored Honeycomb Structure for High-throughput Antireflection Polymer Films,” Journal of Materials Chemistry, vol.22(22), pp.17037-17043.

81. M.Z. Ansari, C.D. Cho and G. Urban, 2012, “Stepped Piezoresistive Microcantilever Designs for Biosensors,” J. Phys. D: Appl. Phys., vol.45(21), 215401 (8pp).

82. C.D. Cho, Y.J. Kim, 2012, “Study of Forming Properties for an Edge Thickening Model Using the Finite Element Method,” Transactions of Materials Processing, vol.21(4), pp.234-239.

83. J.U. Cho, S.J. Hong, S.K. Lee and C.D. Cho, 2012, “Impact Fracture Behavior at the Material of Aluminum Foam,” Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, vol.539, pp.250-258.

84. J.U. Cho, L.Y. Xie, C.D. Cho and S.K. Lee, 2012, “Crack Propagation of CCT Foam Specimen under Low Strain Rate Fatigue,” International Journal of Fatigue, vol.35(1), pp.23-30.

85. M.Z. Ansari, C.D. Cho, 2012, “A Conduction–convection Model for Self-heating in Piezoresistive Microcantilever Biosensors,” Sensors and Actuators A-Physical, vol.175, pp.19-27.

86. M.Z. Ansari, C.D. Cho, 2012, “Comparison between Conduction and Convection Effects on Self-Heating in Doped Microcantilevers,” Sensors, vol.12(2), pp.1758-1770.

87. Z. Yang, J. Hou, Q.L. Liu and C.D. Cho, 2011, “Stress and Strain Concentrations for the Filleted Shafts in Tension,” Advanced Science Letters, vol.4(8-10), pp.2631-2636.

88. S.K. Lee, M.Z. Ansari, N. Wang and C.D. Cho, 2011, “A Computational Study on Residual Strength of Sandwich Composite Panel,” Advanced Materials Research, vols.393-395, pp.521-525.

89. C.H. Piao, W.L. Fu, J. Wang, Z.Y. Huang and C.D. Cho, 2011, “State of Charge Estimation of Ni-MH battery pack by using ANN,” Artificial Neural Networks, vol.2011, pp.243-258.

90. H.W. Ma, W.S. Jiang and C.D. Cho, 2011, “Experimental Study on two Types of New Beam-to-column Connections,” Steel and Composite Structures, vol.11(4), pp.291-305.

91. M.Z. Ansari, C.D. Cho, 2011, “On Self-heating in Piezoresistive Microcantilevers with Short Piezoresistor,” Journal of Physics D-Applied Physics, vol.44(28), pp.1-8.

92. M.G. Lee, J.Y. Kim, J.M. Kim, Y.M. Yang, S.H. Kim and C.D. Cho, 2011, “Study on Development of Flexible Pad for High Speed Train Disk Brake,” Journal of the Korean Society for Railway, vol.14(2), pp.100-108.

93. H.S. Lee, C.D. Cho, A.T. Zehnder and K.W. Choi, 2011, “Development of Micromagnetostrictive Wireless Controllable Actuator,” Journal of Applied Physics, vol.109(7), pp.07E501(3pp).

94. Y.J. Kim, C.D. Cho, 2011, “Study on Forming Condition and Tool of Flywheel by Using Flow Forming Process,” Materials Research Innovations, vol.15(1), pp.S336-S339.

95. K.K. Poornesh, C.D. Cho, 2011, “Poroelastic PEM Fuel Cell Catalyst Layer and Its Implication in Predicting the Effect of Mechanical Load on Flow and Transport Properties,” International Journal of Hydrogen Energy, vol.36(5), pp.3623-3634.

96. G. Shi, N. Wang and C.D. Cho, 2010, “Design of a New Non-Contact Torque Sensor for Rotating Stepped Shaft by Monitoring Magnetic Field,” Applied Mechanics and Materials, vols.44-47, pp.547-551.

97. J.Y. Kim, S.Y. Lee, C.D. Cho and H.I. Ko, 2010, “Study on Local Buckling of District Heating Pipes Using Limit State Design,” Transactions of the KSME, vol.34(12), pp.1829-1836.

98. K.K. Poornesh, C.D. Cho, D.Y. Kim and Y.S. Tak, 2010, “Effect of Gas-Diffusion Electrode Material Heterogeneity on the Structural Integrity of Polymer Electrolyte Fuel Cell,” Energy, vol.35(12), pp.5241-5249.

99. S. Lu, C.D. Cho, K.W. Choi, W.J. Choi, S.K. Lee and N. Wang, 2010, “An Inscribed Surface Model for the Elastic Properties of Armchair Carbon Nanotube,” Journal of Mechanical Science and Technology, vol.24(11), pp.2233-2239.

100. M.Z. Ansari, C.D. Cho, 2010, “An Analytical Model of Joule Heating in Piezoresistive Microcantilevers,” Sensors, vol.10(11), pp.9668-9686.

101. J. Maeng, C.D. Cho, 2010, “Concept Car Development Using Personal Digital Design Process Based on Engineering Technology,” Transactions of the Korean Society of Automotive Engineers, vol.18(5), pp.9-19.

102. K.K. Poornesh, S.K. Lee, C.D. Cho and K.W. Choi, 2010, “Effect of Bipolar Plate Materials on the Stress Distribution and Interfacial Contact Resistance in PEM Fuel Cell,” International Journal of Precision Engineering and Manufacturing, vol.11(4), pp.583-588.

103. S. Lu, C.D. Cho, 2010, “The Study of Inscribed Surface of Armchair Carbon Nanotubes,” Modern Physics Letters B, vol.24(19), pp.2021-2029.

104. S. Lu, C.D. Cho, 2010, “A New Extension of Cauchy-Born Rule for Monolayer Crystal Films,” Nanoscale Research Letters, vol.5(5), pp.863-867.

105. Z. Yang, C.B. Kim, H.G. Beom and C.D. Cho, 2010, “The Stress and Strain Concentrations of Out-of-plane Bending Plate Containing a Circular Hole,” International Journal of Mechanical Sciences, vol.52(6), pp.836-846.

106. K.K. Poornesh, C.D. Cho, G.B. Lee and Y.S. Tak, 2010, “Gradation of Mechanical Properties in Gas-Diffusion Electrode. Part 2: Heterogeneous Carbon Fiber and Damage Evolution in Cell Layers,” Journal of Power Source, vol.195(9), pp.2718-2730.

107. K.K. Poornesh, C.D. Cho, G.B. Lee and Y.S. Tak, 2010, “Gradation of Mechanical Properties in Gas Diffusion Electrode. Part 1: Influence of Nano-scale Heterogeneity in Catalyst Layer on Interfacial Strength Between Catalyst Layer and Membrane,” Journal of Power Source, vol.195(9), pp.2709-2717.

108. G. Zhao, C.D. Cho, S. Lu and Z. Wang, 2010, “Experimental Study on Impact Resistance Properties of T300/Epoxy Composite Laminates,” Journal of Composite Materials, vol.44(7), pp.857-870.

109. M. Choi, J. Kim, H.I. Ko and C.D. Cho, 2010, “Shape Design of Bends in District Heating Pipe System by Taguchi Method, ” Transactions of the KSME, vol.34(3), pp.307-313.

110. C.H. Piao, W.L. Fu, G.H. Lei and C.D. Cho, 2010, “Online Parameter Estimation of the Ni-MH Batteries Based on Statistical Methods,” Energies, vol.3(2), pp.206-215.

111. J.U. Cho, A. Kinloch, B. Blackman, S. Rodriguez, C.D. Cho and S.K. Lee, 2010, “Fracture Behaviour of Adhesively-bonded Composite Materials Under Impact Loading,” International Journal of Precision Engineering and Manufacturing, vol.11(1), pp.89-95.

112. Z. Zhang, C.D. Cho, X. Lu and M. Lou, 2010, “Shaking Table Test of Damping Behavior of SSI Systems,” China Civil Engineering Journal, vol.43(2), pp.1-5.

113. C.H. Park, Z.Y. Huang, J. Wang, C.D. Cho, 2010, “Torque Analysis and Shape Optimization of Electromagnetic Clutch,” Key Engineering Materials, vols.426-427, pp.122-126.

114. B.W. Bang, S.K. Son, J.M. Kim, C.D. Cho, 2009, “Residual Stress Prediction in LSP Surface Treatment by Using FEM,” Transactions of the KSME, vol.33(8), pp.767-772.

115. M.Z. Ansari, C.D. Cho, 2009, “Deflection, Frequency, and Stress Characteristics of Rectangular, Triangular, and Step Profile Microcantilevers for Biosensors,” Sensors, vol.9(8), pp.6046-6057.

116. B.Y. Kim, C.B. Kim, S.G. Song, H.G. Beom, C.D. Cho, 2009, “A Finite Thin Circular Beam Element for Out-of-plane Vibration Analysis of Curved Beams,” Journal of Mechanical Science and Technology, vol.23(5), pp.1396-1405.

117. J.Y. Kim, H.B. Kim, H.I. Ko, Y.M. An, C.D. Cho, 2009, “Design Validation and Improvement of District Heating Pipe Using FE Simulation,” Transactions of the KSME, vol.33(4), pp.337-345.

118. M.Z. Ansari, C.D. Cho, J. Y. Kim, B. U. Bang, 2009, “Comparison Between Deflection and Vibration Characteristics of Rectangular and Trapezoidal Profile Microcantilevers,” Sensors, vol.9(4), pp.2706-2718.

119. J.W. Maeng, C.D. Cho, 2009, “A Next Generation Environmentally Friendly SUV Concept Styling for Audi,” Journal of Korean Society of Design Science, vol.22(6), pp.31-34

120. J.U. Cho, C.D. Cho, M. S. Han, 2009, “Study of Dynamic Crack Propagation in 3PB Steel Specimens Loaded by Impact,” International Journal of Precision Engineering and Manufacturing, vol.10(2), pp.67-72.

121. Z. Zhang, S. Li, G. Tan, C.D. Cho, X. Lu, 2009, “Research on Measurement of Damping Ratios of Full-Scale SSI System and its Distribution Law,” Chinese Journal of Rock Mechanics and Engineering, vol.28(3), pp.641-648.

122. S.LU, C.D. Cho, L.SONG, 2008, “Energy of Armchair Nanotube Using the Modified Cauchy-Born Rule,” International Journal of Modern Physics B, vol.22(31-32), pp.5881-5886.

123. D.J. Yoon, E.Z. Kim, C.D. Cho, Y.S. Lee, “A Process Map for Sequential Compression-Backward Extrusion of AZ31 MG Alloys at Warm Temperature,” International Journal of Modern Physics B, vol.22(31-32), pp.5649-5654.

124. L. SONG, C.D. Cho, S.LU, H. LOAO, 2008, “Study on Softening Constitutive Model of Soft Rock Using Strain Space Based Unified Strength Theory,” International Journal of Modern Physics B, vol.22(31-32), pp. 5375-5380.

125. J.J. Kang, J.E. Kim, S.K. Hong, J.D. Kim, Y.M. Heo and C.D. Cho, 2008, “Numerical Analysis on the High Speed Precision Press for Ultra-Thin Sheet Metal Forming,” Transactions of Materials Processing, vol.17(8), pp. 643-648.

126. H.S. Lee, S.H. Cho, J.B. Lee, C.D. Cho, 2008, “Numerical Modeling and Characterization of Micromachined Flexible Magnetostrictive Thin Film Actuator,” IEEE Tranasactions on Magnetics, vol.44(11), pp.3209-3212.

127. H.S. Lee, C.D. Cho, 2008, “Magnetoelastic Characteristics of the Multilayered Magnetostrictive Thin Film With Polyimide Substrate for Micro Actuator,” IEEE Tranasactions on Magnetics, vol.44(11), pp.4049-4052.

128. M.Z. Ansari, C.D. Cho, 2008, “A Study on Increasing Sensitivity of Rectangular Microcantilevers Used in Biosensors,” Sensors, vol.8(11), pp.7530-7544.

129. H. Ma, C.D. Cho and T. Wilkinson, 2008, “A Numerical Study on Bolted End-Plate Connection Using Shape Memory Alloys,” Materials and Structures, vol.41(8), pp.1419-1426.

130. H.J. Cho, C.D. Cho, 2008, “Prediction of Hot Spots by Correlating Finite Element Analysis and Measurement for an Automotive Disk Brake,” Tribology Transactions, vol.51(5), pp.609-620.

131. Z. Yang, C.D. Cho, C.B. Kim and H.G. Beom, 2008, “The Effect of Biaxial Load on Stress and Strain Concentrations in a Finite Thickness Elastic Plate Containing a Circular Hole,” International Journal for Numerical Methods in Engineering, vol.75(1), pp.103-126.

132. H.J Cho, C.D. Cho, 2008, “A Study of Thermal and Mechanical Behaviour for the Optimal Design of Automotive Disc Brakes,” Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering, vol.222(D6), pp.895-915.

133. Z. Yang, C.B. Kim, Y. Feng and C.D. Cho, 2008, “Abnormal Fracture Appearance in Drop-Weight Tear Test Specimens of Pipeline Steel,” Materials Science & Engineering : A, vol.483(Sp, Iss, IS), pp.239-241.

134. H.S. Lee, C.D. Cho, 2008, “Study on Advanced Multilayered Magnetostrictive Thin Film Coating Techniques for MEMS Application,” Journal of Materials Processing Technology, vol.201(1-3), pp.678-682.

135. D.J. Yoon, S.J. Lim, H.G. Jeong, E.Z. Kim and C.D. Cho, 2008, “Forming Characteristics of AZ31B Magnesium Alloy in Bidirectional Extrusion Process,” Journal of Materials Processing Technology, vol.201(1-3), pp.179-182.

136. H.G. Beom, Y. H. Kim, C.D. Cho and C.B. Kim, 2008, “Modified Boundary Layer Analysis for a Mode III Crack Problem,” Journal of Mechanical Science and Technology, vol.22(4), pp.653-661.

137. G. Zhao, S.K. Lee and C.D. Cho, 2008, “Effect of Compressive Residual Stress Induced During Fabricating Process in the Core of Clamped Sandwich Plate Under Shock Loading,” International Journal of Modern Physics B, vol.22(9-11), pp.1195-1200.

138. H.S. Lee, C.D. Cho, 2008, “Investigation on the Magnetomechanical Behavior of Trilayered GM Actuator,” Journal of Rare Earths, vol.26(2), pp.264-267.

139. H.G. Beom , Y.H. Kim, C.B. Kim and C.D. Cho, 2008, “Modified Boundary Layer Analysis of an Electrode in an Electrostrictive Material,” Archive of Applied Mechanics, vol.78(3), pp.191-209.

140. H.S. Lee, S. P. Chang and C.D. Cho, 2008, “Design and Analysis of Laminated Stainless Steel Membrane-Based Microsensors,” IEEE Sensors Journal, vol.8(1-2), pp.182-187.

141. Z. Yang, C.B. Kim, C.D. Cho and H.G. Beom, 2008, “The Concentration of Stress and Strain in Finite Thickness Elastic Plate Containing a Circular Hole,” International Journal of Solids and Structures, vol.45(3-4), pp.713-731.

142. H. Ma, C.D. Cho, 2008, “Feasibility Study on a Superelastic SMA Damper with Re-Centring Capability,” Materials Science and Engineering: A, vol.473(1-2), pp.290-296.

143. J.U. Cho, S.K. Lee, C.D. Cho, F.S. Rodriguez, B.R.K. Blackman and A.J. Kinloch, 2007, “A Study on the Impact Behavior of Adhesively-Bouned Composite Materials,” Journal of Mechanical Science and Technology, vol.21(10), pp.1671-1676.

144. H.S. Lee, C.D. Cho, 2007, “Magnetostrictive Flexible Thin Film Structure for Micro Devices,” Journal of Rare Earths, vol.25, pp.182-185.

145. Q. Pan, C.D. Cho, 2007, “The Investigation of a Shape Memory Alloy Micro-Damper for MEMS Applications,” Sensors, vol.7(9), pp.1887-1900.

146. M.G. Kim, C.D. Cho, S. Lee, I.Y. Yu and K.H. Chang, 2007, “Deceleration Method of Munition to Used Soft Recovery System for Smart Munition,” Transactions of the Korean Society for Noise and Vibration Engineering , vol.17(9), pp. 777-784.

147. H. Ma, T. Wilkinson and C.D. Cho, 2007, “Feasibility Study on a Self-Centering Beam-to-Column Connection by Using the Superelastic Behavior of SMAs,” Smart Materials and Structure, vol.16(5), pp.1555-1563.

148. C.D. Cho, W.J. Kim, B.H. Choi , S.Y. Kwak and Q. Pan, 2007, “A Finite Element Mesh Management in Casting Simulation,” International Journal Computational Materials Science and Surface Engineering, vol.1(1), pp.4-17.

149. C.D. Cho, Q. Pan and S.K. Lee, 2007, “Mechanical Behavior and Properties of Fiber Reinforced Ceramic Matrix Composites for High Temperature Use,” Journal of Aerospace Power, vol.22(4), pp.594-601.

150. G. Zhao, C.D. Cho, 2007, “Damage Initiation and Propagation in Composite Shells Subjected to Impact,” Composite Structures, vol.78(1), pp.91-100.

151. C.H. Leem, J.M. Ha, M.Z. Ansari and C.D. Cho, 2007, “Intracellular Osmotic Gradient Generation in Rat Ventricle Myocyte by Using a Micro-Perfusion System,” Journal of Biochemical and Biophysical Methods, vol.70, pp.445-453.

152. H.S. Lee, C.D. Cho and S.P. Chang, 2007, “Effect of SmFe and TbFe Film Thickness on Magnetostriction for MEMS Devices,” Journal of Materials Science, vol.42, pp.384-388.

153. H.J. Cho, M.G. Kim and C.D. Cho, 2007, “A Study of Frictional Contact Vibration Influence on Hot Spot in Automotive Disk Brake,” Transaction of the KSAE, vol.15(1), pp.154-161.

154. M.G. Kim, C.H. Park, C.D. Cho and K.C. Cho, 2007, “Phase Change for One to One Resonance of Nonlinear Cantilever Beam,” Transactions of KSAE, vol.17(1), pp.48-54.

155. D.J. Yoon, K.H. Na and C.D. Cho, 2007, “The Microstructure of AZ 31 Magnesium Alloy by Forward Extrusion with Various Extrusion Parameters,” Materials Science Forum, vol.539-543, pp.1818-1823.

156. C.D. Cho, W.J. Kim, B.H. Choi, S.Y. Kwak and P. Qiang, 2007, “A Management on Mesh Modeling for Finite Element Analysis in Casting Simulation,” Journal of Achievements in Materials and Manufacturing Engineering, vol.20, pp.335-338.

157. H.S. Lee, S.P. Chang and C.D. Cho, 2006, “Study on Electro-Mechanical Characteristics of Array Capacitive Pressure Sensors with Stainless Steel Diaphragm and Substrate,” Transations of the KSME A, vol.30(11), pp.1369-1375.

158. M.G. Kim, C.D. Cho, 2006, “Critical Speed Analysis of Juddering Due to Change in Surface Temperature of Disk Brake,” International Journal of Automotive Technology, vol.7(6), pp.697-702.

159. I.Y. Yoo, S.S. Lee, and C.D. Cho, 2006, “Design Study of a Small Scale Soft Recovery System,” Journal of Mechanical Science and Technology, vol.20(11), pp.1961-1971.

160. H.G. Beom, Y.H. Kim, C.D. Cho and C.B. Kim, 2006, “Asymptotic Analysis of an Impermeable Crack in an Electrostrictive Material Subjected to Electric Loading,” International Journal of Solids and Structures, vol.43(22-23), pp.6869-6886.

161. U.S. Lee, J.Y. Cho and C.D. Cho, 2006, “Spectral FEM-Based Dynamic Characterization of Structural Joints: Theory and Experiment,” Key Engineering Materials , vols.326-328, pp.1629-1632.

162. B.H. Choi, W.J. Kim, C.D. Cho, S.Y. Kwak and C.K. Choi, 2006, “FDM/FEM Hybrid Method with a Systematic Field Data Conversion Procedure for Thermal Stress Analysis in Casting Process,” Key Engineering Materials , vols.326-328, pp.1205-1208.

163. H.W. Ma, C.D. Cho, P. Qiang and H.G. Beom, 2006, “A Study on the Lower Flange's Fracture of Endplate Bolted Connection,” Key Engineering Materials , vols.326-328, pp.983-986.

164. C.H. Park, C.D. Cho, C.B. Kim and P. Qiang, 2006, “Experiment Study and Finite Element Analysis of Spring Constant of Welded Metal Bellows,” Key Engineering Materials, vols.326-328, pp.537-540.

165. H.J. Cho, C.D. Cho, M.G. Kim, J.W. Meang and S.K. Lee, 2006, “A Study of Judder Vibration in Automotive Disk Brakes,” Key Engineering Materials , vols.326-328, pp.1301-1304.

166. H.S. Lee, C.D. Cho and U.S. Lee, 2006, “Effect of Film Thicknesses of TbFe and SmFe on Magnetostrictions for Micro-wireless Actuators,” Key Engineering Materials , vols.326-328, pp. 285-288.

167. M.G. Kim, C.D. Cho, C.B. Kim and H.J. Cho, 2006, “Nonplanar Nonlinear Vibration Phenomenon on the One to one Internal Resonance of the Circular Cantilever Beam,” Key Engineering Materials, vols.326-328, pp. 1641-1644.

168. H.J. Cho, C.D. Cho and M.G. Kim, 2006, “The Origin and Effect of Hot Spot Phenomena on Judder Vibration in Automotive Disk Brake,” Transactions of the Korean Society for Noise and Vibration Engineering, vol.16(8), pp.886-892.

169. H.G. Beom, Y. H. Kim, C.D. Cho and C.B. Kim, 2006, “Path Stability of a Crack With an Eigenstrain,” Journal of Mechanical Science and Technology , vol.20(9), pp.1428-1435.

170. C.D. Cho, S.Y. Kwak, W.J. Kim and C.K. Choi, 2006, “Thermo-Viscoelastic-Plastic Deformation of Huge Products in Thermal Process,” Journal of Achievements in Materials and Manufacturing Engineering, vol.17 (1-2), pp.233-236.

171. R.Q. Wang, C.D. Cho, C.B. Kim and P. Qiang, 2006, “A Proposed Phenomenological Model for Shape Memory Zlloys,” Smart Materials & Structures, vol.15(2), pp. 393-400.

172. G. Zhao, C.D. Cho and O.Y. Kwon, 2006, “Experiment Analysis of Impact Damage of Laminated Composite Shells,” Acta Aeronautica et Astronautica Sinica, vol.27(2), pp.250-252.

173. C.D. Cho, H.S. Lee, C.B. Kim and H.G. Beom, 2006, “A Finite Element Analysis for Magnetostrictive Thin Film Structures and Its Experimental Verification,” Key Engineering Materials, vols.306-308, pp.1151-1156.

174. C.D. Cho, B. Lee, 2006, “Analysis of Electro-Statically Driven Micro-Electro-Mechanical Systems,” Key Engineering Materials, vols.306-308, pp.1247-1252.

175. C.B. Kim, C.D. Cho and H.G. Beom, 2006, “Dynamics of a Vibrating Micro Three-Axis Ring Gyroscope,” Key Engineering Materials, vols.306-308, pp.1241-1246.

176. C.H. Park, C.D. Cho, C.B. Kim and H.G. Beom, 2006, “Study on Torque Analysis of Micro-Electromagnetic Clutch by Using the Finite Element Method,” Key Engineering Materials, vols.306-308, pp.613-618.

177. M.G. Kim, C.H. Pak and C.D. Cho, 2006, “Non-Planar Non-Linear Vibration Phenomenon on the One to One Resonance of the Circular Cantilever Beam,” Transations of the KSME A, vol.30(2), pp.171-178.

178. H.G. Beom, Y. H. Kim, C.D. Cho and C.B. Kim, 2006, “A Crack with an Electric Displacement Saturation Zone in an Electrostrictive Material,” Archive of Applied Mechanics, vol.76(1-2), pp.19-31.

179. B. Lee, C.D. Cho, 2006, “Numerical Analysis Procedure for Predicting Temperature Field in Design of Automotive Friction Clutch,” International Journal of Automotive Technology, vol.7(1), pp. 61-68.

180. C.B. Kim, J.W. Park, S. Kim and C.D. Cho, 2006, “A Finite Thin Circular Beam Element for In-Plane Vibration Analysis of Curved Beams,” Journal of Mechanical Science and Technology, vol.19(12), pp.2187-2196.

181. D.J Yoon, S.J Lim, E.J Kim, C D. Cho, 2006, “Plastic Forming Characteristics of AZ3l Mg Alloy in Warm Backward Extrusion”, The Korean Society for Technology of Plasticity, Volume 15, Issue 8,  2006, pp.597-602

182. G. Zhao, C.D. Cho and O.Y. Kwon, 2005, “Simulation and Experimental Investigation of Impact Damage in Composite Shell,” Key Engineering Materials, vols.297-300, pp.1339-1343.

183. R.Q. Wang, C.D. Cho and J.X. Nie, 2005, “Combined Fatigue Life Test and Extrapolation of Turbine Disk Mortise at Elevated Temperature,” Journal of Engineering for Gas Turbines and Power-Transactions of The ASME, vol.127(4), pp.863-868.

184. M.G. Kim, C.H. Park and C.D. Cho, 2005, “One to One Resonance on the Quadrangle Cantilever Beam,” Transactions of the Korean Society for Noise and Vibration Engineering, vol.15(7), pp.851-858.

185. H.S. Lee, M.G. Kim and C.D. Cho, 2005, “Seismic Analysis on a Control Panel of (Nuclear) Power Plant,” Transactions of the Korean Society for Noise and Vibration Engineering, vol.15(6), pp.652-659.

186. M.G. Kim, H.S. Lee and C.D. Cho, 2005, “Non-linear Phenomenon in the Response of Circle Cantilever Beam,” Transactions of the Korean Society for Noise and Vibration Engineering, vol.15(4), pp.445-4510

187. C.H. Piao, C.D. Cho, M.G. Kim and H.S. Lee, 2005, “Study on Torque and Engaging Time Analysis of Micro-Electromagnetic Clutch by Using FEM,” Journal of the Computational Engineering Institute of Korea, vol.18(1), pp.21-28.

188. C.H. Piao, C.D. Cho, M.G. Kim and Q. Pan, 2005, “Study on Torque Analysis of Micro-Electromagnetic Clutch by Using FEM,” The Processing of the Institute of Electrical Engineers, vol.54B(2), pp.60-65.

189. C.D. Cho, E.Y. Choi, H.G. Beom and C.B. Kim, 2005, “Micro-Frictional Dissipation in Fiber-Reinforced Ceramic Matrix Composites and Interfacial Shear Estimation with a Consideration of Uneven Fiber Packing,” Journal of Materials Processing Technology, vol.162, pp.9-14.

190. M.G. Kim, C.H. Park, C.D. Cho and C.H. Piao, 2004, “Nonlinear Vibration Phenomenon for the Slender Rectangular Cantilever Beam,” Transactions of the Korean Society for Noise and Vibration Engineering, vol.14(12), pp.1314-1321.

191. C.D. Cho, G. Zhao, S.Y. Kwak and C.B. Kim, 2004, “Computational Mechanics of Laser Cladding Process,” Journal of Materials Processing Technology, vol.153, pp.494-500.

192. G. Zhao, H.M. Si, H.S. Lee and C.D. Cho, 2004, “Three- Dimensional Finite Element Modeling of Laser Cladding Process,” Journal of the Korean Institute of Surface Engineering, vol.37(5), pp.279-288.

193. G. Zhao, C.D. Cho, 2004, “Progressive Damage Analysis of Composite Shell Under Impact Loading,” Key Engineering Materials, vols.274-276, pp.111-116.

194. G. Zhao, C.D. Cho, 2004, “On Impact Damage of Composite Shells by a Low-Velocity Projectile,” Journal of Composite Materials, vol.38(14), pp.1231-1254.

195. C.D. Cho, B.H. Lee, S.W. Lee and H.J. Cho, 2004, “Computer Simulation on Mechanical Evaluation of Ceramic Matrix Composite Automobile Brake Disks,” Journal of The Ceramic Society of Japan, vol.112(5), pp.S423-S427.

196. C.D. Cho, G. Zhao and J.D. Kim, 2004, “Effects of Latent Heat on Temperature Field in Laser Cladding Process,” Journal of Xian Jiaotong University, vol.38(5), pp.500~503.

197. H.M. Si, C.D. Cho and C.B. Kim, 2004, “Effects of Elastic Energy of Thin Films on Bending of a Cantilevered Magnetostrictive Film-Substrate System,” KSME International Journal, vol.18(4), pp.622-629.

198. H.M. Si, C.D. Cho, 2004, “Finite Element Modeling of Magnetostriction for Multilayered MEMS Devices,” Journal of Magnetism and Magnetic Materials, vol.270(1-2), pp.167-173.

199. J.Y. Heo, C.D. Cho, H.W. Cho, D.R. Kim and K.S. Han, 2004, “Numerical Analysis Procedures for Reliable Design of Automotive Mechanical Clutches,” Journal of Passenger Cars / SAE Transactions, vol.762, pp.1106-1123.

200. G. Zhao, C.D. Cho and J.D. Kim, 2003, “Application of 3-D Finite Element Method Using Lagrangian Formulation to Dilution Control in Laser Cladding Process,” International Journal of Mechanical Sciences, vol.45(5), pp.777-796.

201. H.M. Si, C.D. Cho and S.Y. Kwak, 2003, “A Hybrid Method for Casting Process Simulation by Combining FDM and FEM with an Efficient Data Conversion Algorithm,” Journal of Materials Processing Technology, vol.133(3), pp.311-321.

202. G. Zhao, C.D. Cho, 2003, “Study of Postbuckling Analysis of Laminated Composite Shell Based on an Improved Arc-Length Method,” Engineering Mechanics, vol.20(1), pp.106-111.

203. C.D. Cho, G. Zhao, 2002, “Effects of Geometric and Material Factors on Mechanical Response of Laminated Composites Due to Low Velocity Impact,” Journal of Composite Materials, vol.36(12), pp.1403-1428.

204. C.D. Cho, S.I. Ahn, 2002, "Transient Thermo-Elastic Analysis of Disk Brake Using the Fast Fourier Transform and Finite Element Method,” J. Thermal Stresses, vol.25, pp. 215-243.

205. G. Zhao, C.D. Cho, 2001, “Variable Influence on Behavior of Laminated Composites Subject to Impact”, Journal of Xi'an University of Architecture and Technology, vol.33(4), p369

206. S.Y. Kwak, C.D. Cho, “Thermal Stress Analysis by Field Data Conversion between FDM and FEM”, Journal of the Korean Society for Heat Treatment, vol.14(4), p228

207. C.D. Cho, S.I. Ahn, 2001, "Thermo-Elastic Analysis for Chattering Phenomenon of Automotive Disk Brake,” KSME Int. J., vol.15(5), pp.579-589.

208. J.D. Kim, J.K. Jung, B.C. Jeon and C.D. Cho, 2001,"Wide Band Laser Heat Treatment Using Pyramid Polygon Mirror,” Optics & Lasers Engineering, vol.35, pp.285-297.

209. G. Zhao, H.M. Si, C.D. Cho and J.D. Kim, 2001,"Numerical Simulation Considering Latent Heat Effect for Laser Cladding Process,” Korean Society of Precision Engineering, vol.18(10), pp.134-147.

210. C.D. Cho, G. Zhao and C.B. Kim, 2000,"Nonlinear Finite Element Analysis of Composite Shell Under Impact,” KSME International Journal, vol.14(6), pp.666-674.

211. J.H. Ham, H. Lee and C.D. Cho, 2000, "Failure Mechanism of Metal Matrix Composites Subject to Transverse Loading,” Transations of the KSME A , vol.24(6), pp.1456-1469.

212. C.D. Cho, S.I. Ahn, 2000, "Surface Temperature in Sliding Systems Using the FFT Finite Element Analysis,” Journal of the KSTLE, vol.16(3), pp.218-222.

213. C.D. Cho, G. Zhao and H.J. Kim, 2000,"Postbuckling and Damage Analysis of Composite Laminated Hollow Cylinder Under Lateral Pressure,” Korean Society of Precision Engineering, vol.17(4), pp.163-172.

214. C.J. Kim, C.D. Cho, 2000,"Matrix and Dyadic Representation of Stress and Strain,” Transations of the KSME A, vol.24(2), pp.489-495.

215. C.D. Cho, 1999, "Relationship Between Frictional Heating and Micro-Failure State in a Continuous Fibre Reinforced Ceramic Matrix Composite Under Cyclic Loading,” J. Mater. Sci. Lett., vol.18, pp.463-466.

216. G. Zhao, C.D. Cho, 1999, “Stress Distribution of Laminated Composite Shell Subjected to Impact Load,” Journal of Xi'an University of Architecture and Technology, vol.31(1), pp.40-43.

217. C.D. Cho, S.Y. Kwak, 1999, "Study on the Stress Singularity of Interface Crack by Using Boundary Element Method,” Korean Society of Precision Engineering, vol.16(4), pp.197-204.

218. C.D. Cho, G. Zhao, 1999, "Dynamic Response and Damage of Composite Shell Under Impact,” KSME International Journal, vol.13(9), pp.596-608.

219. D.H. Lee, C.D. Cho, 1999, "Study on the Oxide Growth of Semiconductor by Finite Element Method,” Inha University RIST, vol.27, pp.59-65.

220. C.D. Cho, 1996, "Ultimate Strength Prediction of Continuous Fiber-Reinforced Brittle Matrix Composites,” KSME International Journal, vol.10(1), pp.49-56.

221. C.D. Cho, S.I. Ahn, 1996, "Study on the Behavior of a Center Crack Under Thermal Impact by the Dislocation Theory,” Transations of the KSME A, vol.20(11), pp.3408-3414.

222. C.D. Cho, H.J. Kim, 1996,"Postbuckling Analysis of Composite Laminated Hollow Cylinder under Lateral Pressure,” Inha University RIST, vol.24, pp.23-29.

223. J.D. Kim, C.D. Cho, J.W. Seo and Y.M. Cho, 1995, “Prediction of Case Depth in Laser Beam Hardening,” Journal of the Korean Society Engineering, vol.12(6), pp.87-95.

224. O.S. Lee, C.D. Cho, S.K. Hong and N.J. Sung, 1994, "Revisit on Experimental Conditions in Determination of Stress Intensity Factor and the J-Integral Using the Methods of Caustics,” Transations of the KSME A, vol.18(9), pp.2331-2338.

225. C.D. Cho, 1994, "Influence of Fiber Breaks on the Frictional Work in a Continuous Fiber-Reinforced Ceramic Matrix Composite,” Transations of the KSME A, vol.18(7), pp.1730-1737.

226. J.W. Holmes, C.D. Cho, 1992, "Experimental Observation of Frictional Heating in Fiber Reinforced Ceramics,” J. Am. Cream. Soc., vol.75(4), pp.929-938.

227. J.W. Holmes, C.D. Cho, 1992, "Frictional Heating in a Unidirectional Fiber-Reinforced Ceramic Composite,” J. Mater. Sci. Lett., vol.11(1), pp.41-44.

228. C.D. Cho, J.W. Holmes, J.R. Barber, 1992, "Distribution of Matrix Cracks in a Uniaxial Ceramic Composite,” J. Am. Cream. Soc., vol.75(2), pp.316-324.

229. C.D. Cho, J.W. Holmes, J.R. Barber, 1991, "Estimation of Interfacial Shear in Ceramic Composites from Frictional Heating Measurements,” J. Am. Cream. Soc., vol.74(11), pp.2802-2808.

230. J.H. Park, C.D. Cho and Y.Y. Earmme, 1985, "A New Interface Crack Model with Yield Zones," The Korean Society for Aeronautical and Space Sciences, vol.13(3), pp.16-29.